Table of Contents
Electric Semi Truck Physics: Hauling 40 Tonnes
Electric semi truck physics in plain numbers: rolling resistance, drag, battery mass and why Tesla shedding 1,000 pounds was a payload decision, not styling.
On September 25, 2026, Tesla finally delivered its first electric Semi trucks in Reno, Nevada, nine years after the 2017 reveal. Buried in the coverage was a detail that looked cosmetic and was not: the company “shed approximately 1,000 pounds from the original prototype design.”
Those thousand pounds are payload. On a truck operating at a legal gross weight limit, every kilogram of vehicle is a kilogram of cargo you cannot carry. That is the central fact of electric semi truck physics, and you can work out why with a calculator and about fifteen minutes.
Key Takeaways
- Tesla’s most capable Semi achieves “500 miles or more on one charge (depending on the size of the load),” with the premium model “just shy of $300,000 before incentives.”
- At highway speed, aerodynamic drag and rolling resistance on a loaded semi are roughly comparable in magnitude, each around 50–60 kW of the road load.
- A battery sized for 500 highway miles lands near 1,000–1,100 kWh, which weighs roughly 6–7 tonnes at realistic pack energy density. The diesel it replaces carries about 250 kg of fuel.
- That mass ratio, about 25 to 1, is the single hardest constraint in heavy-truck electrification, and it comes straight out of payload.
- A demo charged a Semi from 3% to 60% in 30 minutes, which works out to roughly 1.1 megawatts of average power. A source told TechCrunch that “charging infrastructure remains a hurdle.”
What Tesla actually delivered
The event was in Reno, Nevada on September 25, 2026. Tesla opened a new facility next to its first Gigafactory, dedicated to Semi manufacturing and expected to create 3,000 local jobs, with plans to build as many as 50,000 trucks annually, roughly 1,000 per week.
The specifications reported: the most capable version achieves “500 miles or more on one charge (depending on the size of the load),” with shorter-range variants also available. The premium model costs “just shy of $300,000 before incentives,” though executives did not reveal final pricing at the event. Tesla is building a network of megawatt charging stations, and a demonstration showed a Semi charging from 3% to 60% during the 30-minute event.
Two engineering corrections are also on the record, and both are more revealing than the headline numbers. Tesla reduced axle oils from three to one. And it replaced non-functional pop-out windows with “standard roll-down windows” after admitting the original design was “not sufficient.” Nine years from reveal to delivery produces that kind of list.
The physics, with numbers you can check
What follows is a back-of-the-envelope calculation using standard figures. The assumptions are stated so you can argue with them, which is the point of the exercise.
Where the energy goes at highway speed
A truck on flat road at constant speed is fighting two forces.
Rolling resistance is the energy lost deforming tyres and bearings. The formula is force = coefficient × mass × gravity. Using a good Class 8 tyre coefficient of 0.006, a gross mass of 36,000 kg, and gravity at 9.81 m/s²: 0.006 × 36,000 × 9.81 ≈ 2,120 newtons
At 90 km/h, which is 25 metres per second, power = force × velocity: 2,120 × 25 ≈ 53 kilowatts
Aerodynamic drag rises with the square of speed. Force = ½ × air density × drag area × velocity². Using 1.2 kg/m³ for air and a drag area (Cd × frontal area) of about 6 m² for a modern tractor-trailer: 0.5 × 1.2 × 6 × 25² = 2,250 newtons → 2,250 × 25 ≈ 56 kilowatts
So at 90 km/h the two forces are nearly equal. Add drivetrain losses and cab auxiliaries and you are near 125 kilowatts drawn from the battery.
What that means for battery size
500 miles is 805 kilometres. At 90 km/h that is just under nine hours. Nine hours at 125 kW is about 1,120 kilowatt-hours, which also works out to roughly 2.2 kWh per mile, inside the range the freight industry reports for battery-electric Class 8 trucks.
Now weigh it. At a realistic 2026 pack-level energy density of 160 watt-hours per kilogram, 1,120 kWh of battery weighs: 1,120,000 ÷ 160 = 7,000 kilograms
Seven tonnes.
What the diesel carries instead
A diesel tractor doing 500 miles at roughly 7 miles per gallon burns about 71 gallons, which is around 270 litres, weighing roughly 230 kilograms of fuel. Add the tank and you are near 250 kg.
Seven tonnes against 250 kilograms. A ratio of about 28 to 1 in energy-storage mass, for the same journey. Closing that gap is the whole point of the battery engineering career that keeps growing.
That is not a manufacturing problem anyone can engineer away in a product cycle. It is the energy density of a chemical bond versus the energy density of an electrochemical cell, with a heat engine’s 40% efficiency partly closing the gap and nowhere near fully.
Why the thousand pounds mattered
Trucks operate against legal gross weight limits. Under a fixed limit, vehicle mass and cargo mass are in direct competition: the heavier the truck, the less it can carry and still be legal.
So when Tesla removed approximately 1,000 pounds from the prototype, it did not make the truck faster or cheaper in any way a customer would notice directly. It gave the customer back 1,000 pounds of revenue freight on every single load, for the life of the vehicle.
That reframes the entire engineering programme. Reducing axle oils from three to one is mass and maintenance. Range variants exist so a fleet running 200-mile lanes does not have to haul a 500-mile battery it never uses, which is pure payload recovery.
| Constraint | Diesel Class 8 | Battery-electric Class 8 |
|---|---|---|
| Energy storage mass for 500 miles | ~250 kg of fuel | ~7,000 kg of battery (estimate) |
| Mass changes during the trip | Gets lighter as fuel burns | Constant |
| Refuel / recharge time | ~15 minutes | ~30 min to 60% at megawatt power |
| Infrastructure per vehicle | A pump | Megawatt-class connection |
| Energy recovered braking downhill | None | Substantial on grades |
| Road-load physics | Identical | Identical |
| Maintenance items | Engine, exhaust, transmission | Motor, inverter, reduction gear |
Notice the sixth row: the physics of pushing air and rolling rubber is exactly the same for both. The entire difference is in how the energy is stored, converted and replaced.
The megawatt charging number
Run the demo numbers. Charging from 3% to 60% is 57% of the pack. On a pack near 1,000 kWh, that is about 570 kWh delivered in 30 minutes, an average power of roughly 1.14 megawatts.
For scale, hold that against NACFE’s depot research, which found that fleet depots using less than 10 MWh per day are “ready for electrification now.” A single 570 kWh charge is about 6% of that entire daily allowance. Seventeen such charges would consume a small depot’s whole day.
That is why “charging infrastructure remains a hurdle” is the quote that matters most in the Tesla story, and why NACFE found “it took 9 to 36 months to energize the infrastructure” at the depots it studied. The trucks are a manufacturing problem. The megawatts are a utility problem, and utilities move on a different clock.
How to Teach Your Kid About Hauling Physics
Ages 5–8: the wagon and the wind
Two experiments with a wagon or a wheeled bin. First, pull it empty, then load it with books and pull again. That difference is rolling resistance scaling with mass. Second, pull a large flat piece of cardboard held upright as you walk fast. That resistance is drag, and it gets much worse the faster you go. One sentence each: “heavy is hard” and “fast is hard, in a different way.”
Ages 9–12: measure a rolling resistance coefficient
You need a luggage scale or a fishing scale and a wagon. Weigh the loaded wagon. Then hook the scale to the handle and pull it along a flat, smooth floor at a slow, steady speed, reading the force.
Coefficient = force ÷ (mass × 9.81), with force in newtons. If your scale reads kilograms, multiply by 9.81 to get newtons.
You will get something between 0.01 and 0.05, much worse than a truck tyre’s 0.006, because your wagon has small, hard wheels and unoptimised bearings. Discovering that a truck tyre is several times better than a toy wheel is a real engineering insight, arrived at by measurement.
Ages 13+: size the battery yourself
Give your teen the four assumptions: rolling coefficient 0.006, gross mass 36,000 kg, drag area 6 m², air density 1.2 kg/m³. Have them compute road load at 90 km/h, convert to a kilowatt-hour figure for 805 km, and then divide by a pack energy density of 160 Wh/kg to get a battery mass.
Then the second pass, which is the real lesson: have them redo it at 110 km/h. Drag scales with velocity squared, so the drag term jumps by about 50% while rolling resistance barely moves. They will discover that speed is far more expensive for an electric truck than for anything else in this calculation, and that is precisely why freight companies care so much about posted speeds.
The question to ask: “Where does the energy actually go when a truck drives on flat road at a steady speed?”
If the answer is “to make it move,” push back: it is already moving and the road is flat, so no energy is going into speeding up or climbing. All of it goes into deforming tyres and shoving air sideways. A kid who gets there has understood something about energy that most adults never articulate.
What to do at home
Watch for the trailer, not the tractor
Most of the drag on a tractor-trailer comes from the trailer and the gap between the two. Side skirts, boat tails and gap fairings on trailers are not decoration; they are the cheapest available range extension on any truck. Spotting them on the motorway turns a boring drive into a physics observation.
Use speed as the lever
The next time you are on a long drive, note how the family car’s efficiency readout changes between 90 and 110 km/h. The drop is the velocity-squared drag term, visible on a dashboard. The same effect is far more costly for a truck carrying seven tonnes of battery.
Separate range from payload
A longer-range electric truck is not strictly better. It carries more battery, which means it carries less cargo. A fleet choosing a 300-mile variant for 200-mile routes is making the right call. This is one of the clearest examples of engineering as trade-off rather than maximisation.
Follow grade, not just distance
Regenerative braking recovers very little on flat highway and a great deal on mountain descents. A route’s elevation profile matters more for electric trucks than for diesel ones, which is why the easier electrification wins are in flatter, denser freight corridors first.
What not to do
Do not treat my numbers as published specifications. They are estimates from stated assumptions, and real vehicles differ: Tesla has not disclosed its battery capacity in the reporting cited here. Use the arithmetic to understand the shape of the problem, not to argue about a specific truck. That distinction between a model and a measurement is worth teaching on its own.
What to Watch For Over the Next 3 Months
- Week 4: Watch for any disclosure of the Semi’s battery capacity in kilowatt-hours. That single number lets anyone check every efficiency claim, which is why it tends to stay unpublished.
- Month 2 red flags: Watch for range claims that omit payload. The published phrasing, “500 miles or more on one charge (depending on the size of the load)”, is honest precisely because it names the dependency. A range figure without a load figure is incomplete.
- Month 3 self-check: Can your teen explain why a faster truck costs disproportionately more energy than a heavier one? If they reach for velocity-squared, the drag concept landed.
Frequently Asked Questions
How big is an electric semi’s battery?
Tesla has not disclosed the figure in this reporting. From the published 500-mile range and standard road-load physics, an estimate lands near 1,000–1,100 kWh, which would weigh roughly 6–7 tonnes at a realistic pack energy density. Treat that as an engineering estimate, not a specification.
Why does battery weight matter so much on a truck but not on a car?
Because trucks operate against legal gross weight limits with cargo as the revenue. Extra vehicle mass directly displaces payload. A family car has enormous spare capacity relative to its typical load, so a few hundred kilograms of battery changes nothing commercially.
Is an electric semi more efficient than a diesel one?
At the drivetrain, substantially: DOE puts electric energy-to-wheels conversion above 77% against 12–30% for conventional vehicles. But a long-haul truck spends most of its energy on drag and rolling resistance, where the physics is identical, and it carries far more storage mass. The efficiency advantage is real and smaller than the headline ratio implies.
What is megawatt charging?
Charging at power levels above one million watts. The Semi demonstration of 3% to 60% in 30 minutes implies an average near 1.14 MW. For comparison, NACFE classifies fleet depots under 10 MWh of daily consumption as ready to electrify now, so one such charge is a meaningful fraction of a small depot’s entire day.
Will electric trucks replace diesel on long routes?
Not quickly, on this physics. The easier wins are medium-duty vehicles that return to a depot nightly, which is why FedEx ordered 2,000 of them from Harbinger, see why freight electrifies first. Long haul requires either a large improvement in pack energy density or a change in how weight limits treat battery mass.
Why did it take nine years?
The public record shows the programme working through a long list of practical problems: mass reduction, axle oil count, window hardware that was “not sufficient,” and charging infrastructure that a source still describes as “a hurdle.” Heavy trucks are an unforgiving engineering environment and the gap between a reveal and a delivery is where that shows up.
About the author
Ricky Flores is the founder of HiWave Makers and an electrical engineer with 15+ years of experience building consumer technology at Apple, Samsung, and Texas Instruments. He writes about how kids learn to build, think, and create in a tech-saturated world. Read more at hiwavemakers.com.
Sources
- TechCrunch. (2026, September 25). “Tesla finally moves to electrify trucking after a decade of work and delays.” https://techcrunch.com/2026/09/25/tesla-finally-moves-to-electrify-trucking-after-a-decade-of-work-and-delays/
- North American Council for Freight Efficiency. “Run on Less – Electric DEPOT.” https://nacfe.org/research/run-on-less/run-on-less-electric-depot/
- U.S. Department of Energy / EPA. “Electric Vehicles: Energy Efficiency.” fueleconomy.gov. https://www.fueleconomy.gov/feg/evtech.shtml
- U.S. Environmental Protection Agency. “Fast Facts: Transportation Greenhouse Gas Emissions.” https://www.epa.gov/greenvehicles/fast-facts-transportation-greenhouse-gas-emissions
- TechCrunch. (2026, September 30). “FedEx orders 2,000 electric trucks from Harbinger in $300M deal.” https://techcrunch.com/2026/09/30/fedex-orders-2000-electric-trucks-from-harbinger-in-300m-deal/
- U.S. Department of Energy. “Electric Vehicle Basics.” Alternative Fuels Data Center. https://afdc.energy.gov/vehicles/electric-basics-ev